Abstract2actual
  • Home
  • Blog
  • Gallery
  • Buy stuff
  • Contact
  • About

Make something on a whim

8/11/2014

0 Comments

 
Picture
TA5 paper weight. #Abstract2Actual, 5:15
I didn't have the prosthetic hand completed for the Charlotte  Tech After Five event like I wanted, although the partially finished red ABS hand was good enough to bring this time.  So I decided I'd also print something unique for Phil Yanov, the connectorati who runs Tech After Five.  In Google SketchuUp, I started with a 2 inch cube, embossed the letter T on one side, the letter A on the other, and put a recess of the number 5 on top: TA5.  Then I designed a number 5 that would fit into the recess.  I printed cube in glow in the dark blue ABS and the number 5 in black ABS, the colors of TA5 and the GSATC.  It turned out really cool.
0 Comments



Leave a Reply.

    View my profile on LinkedIn

    TJ Emsley

    Lifetime tinkerer.

    Archives

    October 2022
    January 2021
    November 2020
    October 2020
    September 2020
    February 2018
    January 2018
    January 2017
    October 2016
    August 2016
    July 2016
    June 2016
    May 2015
    April 2015
    March 2015
    February 2015
    December 2014
    October 2014
    August 2014
    July 2014
    May 2014
    April 2014
    March 2014
    November 2013
    October 2013

    Categories

    All
    3d Design
    3d Printing
    Open Source

    RSS Feed




Proudly powered by Weebly