Abstract2actual
  • Home
  • Blog
  • Gallery
  • Buy stuff
  • Contact
  • About

Open Source: a great model for giving back

11/25/2013

0 Comments

 
PictureHigh School built #Abstract2Actual in 8 weeks
My Airwolf3d v5.5 is based on the open source Prusa-Mendel design.  Much of today's 3d printing is founded on the concept of a "free" self replicating rapid prototyping machine, a.k.a. reprap.  Not only is the software used  to run the machine freely available to the public, in many cases, the hardware designs are too.
Free, in this context, doesn't mean it doesn't cost anything.  It just means that anyone is freely licensed to use, copy, study, and change the software in any way, so long as they comply with the license terms.  I donated to Slic3r and Pronterface, two of the opensource projects that I regularly use.  I was also compelled to find a way to give something back to the community since I was getting so much from the people who make free 3d printing possible.
I decided to take my Airwolf3d v5.5 and use it to help the local high school engineering students build a 3d printer of their own.  I knew that they had an engineering program and that they used 3d modeling software as a part of their curriculum.  They were able to design lots of things, but were limited to building puzzle cubes with wooden blocks.  It was the only affordable build option they had.
I purchased an Airwolf3d v5.5 kit for the school, We used my printer to print out the structural components, gears, mounts, etc, in school colors.  We also re-designed a custom electronics case with the school name on it.  They named their machine JOOS.

In the middle of printing parts for the 3D printer, the students wanted to know what other kind of things they could make with this machine.  We took a detour to thingiverse.com and the students picked out this model to build. Thingiverse is a great website where you can share and download 3D designs.

Picture
Students wanted to print something useful. So we downloaded this pteradon from thingiverse.com
0 Comments

Your comment will be posted after it is approved.


Leave a Reply.

    View my profile on LinkedIn

    TJ Emsley

    Lifetime tinkerer.

    Archives

    October 2022
    January 2021
    November 2020
    October 2020
    September 2020
    February 2018
    January 2018
    January 2017
    October 2016
    August 2016
    July 2016
    June 2016
    May 2015
    April 2015
    March 2015
    February 2015
    December 2014
    October 2014
    August 2014
    July 2014
    May 2014
    April 2014
    March 2014
    November 2013
    October 2013

    Categories

    All
    3d Design
    3d Printing
    Open Source

    RSS Feed




Proudly powered by Weebly